Shopping basket
0 product(s)
progress indicator
Adding product...
The online platform for horticulture Personal advice from our specialists More than 25.000 products More than just a webshop
Logo image

AluPro can 25 l

Do not delete this link

AluPro can 25 l

Item no. 181801272
can = 25 liter
Price available on request. You can send us your request by clicking on the button below.
Your request will be send to your contact person


The water treatment in a combined aluminum-steel system is complicated by the fact that steel is resistant to corrosion at a pH of greater than 9.5, and aluminium is resistant to corrosion in a pH range of 6-8. At higher pH values ​​than 8 aluminum goes into solution by corrosion. Alupro is based on a phosphate buffer and resistance to products that are not toxic to the plants in case of a leak.

Alupro stabilizes the pH-value of the water heater to a value between a pH of 8 and a pH of 8.5. If the pH of the heating water nevertheless has a tendency to assume a higher value, the pH of the heating water must be corrected. In addition, a Alupro cared for stabilization of the existing hardness and it has a dispersing, cleansing effect on pollution already present in the system. By Alupro dispersed pollution can be well removed from the system by partial flow filtration.
Corrosion by metal passivation and oxygen bond is provided by a number corrosieïnhibitors, including the product OxPro, an organic oxygen scavenger.

Dosage instructions
The dosage of Alupro depends on the degree of contamination in the system. The basis for dosage softened water is 0.5 liter per m3 system volume, per 1 °dH in the heating water must be dosed Alupro 0.25 liter per m3 of extra system volume. A correct Alupro dosage can be adjusted, by determination of the pH (up to 8.5) and of the phosphate content (20-50 ppm) in the heating water. The target value for the concentration of oxygen binder in the heating water is 10-100 ppm. If much oxygen is consumed OxPro binder can be nagedoseerd separately.

Wear suitable protective clothing, gloves and face protection! With eye or skin contact, rinse with water. In case of eye contact call a physician.

Physical properties

Appearance Brunette solution
pH 7

For each crop protection chemical or biocide product the user must comply with the local legal conditions and regulations. Use crop protection products and Biocides safely. Always read the label and the safety data sheet.

This product will not necessarily be approved or authorized in your country.
Please check with the appropriate authority in your country as to whether you may legally use this product.