Circukon filter UDI 3" 100 micron

Highly resistant steel with plastic provide a filter that fits many purposes. The UDI Circukon PVC filter has a filter element with a stainless steel filter mesh of 75 to 800 microns. The dirt is collected continuously during operation, so that there is nog increase in the differential pressure. This is accomplished by a specially designed vertebra plate with four oblique drilled holes. The inflow speed is optimized by removing  or asserting plugs.

There are many applications possible due to a high flow rate difference per hole, the entire filter area is optimally utilized by a uniquely designed spiral groove under the filter gauze. The dirt-collecting space is a part of the filter element. The conical shaped inlet prevents backflow of the dirt. The filter cover is light and easy to handle.

The waste outlet can be automated in a simple manner. In order to increase the dirt removal capacity, the cross-flow can be applied to the filter. There’s a comprehensive program of joints and shortcuts available for the assembly of the units (from the same supplier)

Application

• Recirculation systems
• Cooling water processes
• Washwater cleaning foodindustry
• Basin water filtration
• Irrigation systems

Coatings
In preparation for the coating, the filters are provided with a special layer of zinc phosphate. This treatment brings about a good adhesion of the coating and protects it against corrosion from the inside. Thereafter, the polyester coating is applied electrostatically, both internally and externally. After this process they’re hardened in the oven. The overall process consists of seven steps, and results in a perfect coating with a thickness of about 120 microns.

Execution
In-line filter housing, downwardly faced dirt-collecting space in the filter element.

Materials

• Polyester coated steel
• Neoprene rubbers
• Nylon vertebral plate 
• PVC filterelement with stainless steel filter gauze

Technische gegevens