ED Mini compact rotating sprinkler

* high sprinkling uniformity
* including built-in filter
* turbulence chamber to counter fouling
* to be mounted both on and under the pipe
* deliverable with or without anti-drip element
* only 2 jets per 6,40, 8,00 or 9,60 m.
* sprinklers on 1,5 (or 2) m.
* working pressure 2 bar
* conical connection for M11 or 3/8" plunjer

Colour	Blue
Pass through (mm)	1,2
Water delivery (ltr/hour)	70
Diameter (mm)	7,6

Assembly advice:
Mount the plunger perpendicular to the irrigation pipe. The plunger must be tightened ''hand-tight''. The EIN DOR parts should be pressed together with a twist (hand-tight).

Instructions of use:
For proper operation and long life, the correct working pressure (2 bar on the nozzle) and optimum filtration (300 micron at 160 ltr/h; 200 or 115 micron at 120 ltr/h or smaller) are essential. The use of chemicals, which can come into contact with the nozzles via the watering or the environment, can damage the high value plastic. Rinsing with clean water after an irrigation cycle increases the service life.

Maintenance advice:
Rotary nozzles improve water distribution, but require more attention (inspection and maintenance). Because of the rotating parts, the nozzle is more sensitive to wear and tear, which reduces uniformity. A timely replacement of the nozzle prevents that. The nozzles should be cleaned as follows: 5 minutes in a bucket of 1% hydrochloric acid and rinse well afterwards. Do not use nitric acid.