Shopping basket
0 product(s)
progress indicator
Adding product...
The online platform for horticulture Personal advice from our specialists More than 25.000 products More than just a webshop
Specialists: For all your questions about the webshop
+31 174 446 407
Logo image

Wood & Stone Coat Exterior 250 ml

Do not delete this link

Wood & Stone Coat Exterior 250 ml

Item no. 370012382
box = 48 piece(s)
Price available on request. You can send us your request by clicking on the button below.
Your request will be send to your contact person


Wood & Stone Coat Exterior (WSCE) is a nanotechnology based coating which protects and seals in one treatment. The WSCE provides a protective layer against water and dirt, as a result treated material maintains its look and functionality.

WSCE is specially developed for the treatment of porous, highly absorbent surfaces like brick, plaster, etc. It offers excellent protection against moss growth, bacteria and algae. Dirt no longer adheres to the surface and can easily be removed.


  • Breathability
  • Savings in maintenance and cleaning
  • Hydro-and oleophobic
  • No breakdown by rainfall
  • The applied nan coating gives a very long-lasting protection against dirt and moss algae growth


  • Masonry
  • Precast concrete
  • Stucco
  • Wood
  • Teak
  • Concrete

Surface condition
The precondition for optimal hydrophobic effect is the absorption of the hydro phobizing agent. This depends on the pore volume of the surface to be treated and the moisture content. Hence, the surface should be as dry as possible. In practice is the impregnation at all temperatures possible. We recommend an application temperature between 8 C to 25 C.

Processing advice
To remove any deposits and/or fats, we recommend to follow the following steps:


  • Shake Cleaner before use
  • Apply by spraying
  • Clean with a soft cloth, sponge or brush. If necessary, rinse with water and dry by pulling large areas with wiper


  • The surface to be treated with nebulizer start at the bottom with spray
  • Divide excess product with a roller or brush
  • Working from bottom to top
  • Control of a surface, after 3 hours again treat surface according to the above procedure
  • If product is not holding the application is well executed!

Colour and Shine

  • Colourless

On a smooth surface consumption is approximately 24-32 square meter per litre*
*This indicated consumption is a reference value. Depending on the nature of the surface and the processing it may vary. Exact values can only by determined per project through plots.