This pump is perfect for light application. Step less adjustable engine rpm enabling you to fill even small amounts of water. The pump can run dry for a couple of minutes because it has no seal. The liquid is not contaminated because there are no lubricants applied. Our advice is to connect a 1'' female threaded GK coupling to the threaded connection.
Material Pump | Polypropylene (PP) | Wire connection | 1'' external thread |
Material drive axle | Hastelloy C (HC) | Power supply | 230 Volt, 50Hz |
Plug length | 1000 mm | Engine power | 200 Watt |
Diameter | 32 mm | Protection class | IP24 |
Max. capacity | 75 l/min (Measured with water) | Executed with | On/off switch integrated into the speed control, with cable and molded plug |
ór max. differential head | 7 mWk | Max. temperature | 40ºC |
ór max. viscosity | 300 mPas | Weight | ca. 3 kg |
ór max. density | 1,3 kg/dm3 | Provided with bracket, where optionally a filling pistol can be connected to. |