Beekenkamp Group Project | Electricity

The electrical installation at Beekenkamp Group

For the new construction at Beekenkamp Group it was decided to have all the grow zones controlled independently. For this reason, Royal Brinkman installed 56 control and grow light panels. A total of 7.8 km of cables were fitted and connected to various main switchboards and distribution switchboards.

Fitting power cables

In order to provide all the desired equipment with electrical power, first 7.8 km of cables were fitted. These were applied to a sand bed, to protect the cables. The cabling was connected to three main distributors. From the main distributor, the power cables were lead to four distribution switchboards in the corridors. This way, the entire company, including offices, is equipped with grid current. Beekenkamp Group expressed the desire to be able to control all 28 grow zones independently. For this purpose, independent control and grow light panels were installed in every zone. For the right electric voltage, four distribution switchboards were mounted in the corridors, that the 56 control and grow light panels were connected with.

Main and distribution switchboards

In the CHP room, three distributors were installed. The distributor HKL-1 offers room for the connection of all power supplies necessary for the greenhouse installation (below distributors in corridors), the irrigation area, offices and the CHP room. For future PV installations, four end groups, as well as a number of spare groups, are available. 

The distributors HKB-1 and HKB-2 serve as main distributors for the entire illumination system, fourteen illumination panels are connected to each of the distributors. A total of 28 grow light panels.

Control and grow light panels

Every compartment has a control panel for the power supply and control of the relevant installations per compartment, so that all compartments remain separate. 28 control panels in total were delivered and mounted, each panel was customized for each unique compartment. All panels are dimensioned similarly though. 
 
A grow light panel was mounted next to each control panel, offering connection options for the grow light per compartment. The grow light panels are executed with the same dimensioning as the control panels, which gives the entirety a uniform appearance. The grow light panels are also suitable for the addition of LED lighting

The panels are mounted to the (inner) front walls of the compartments and fitted all around with cable ducts in which the cables can be laid neatly, towards the correct control or grow light panel.
Contact
Do you have a question or do you want more information? Fill out the contact form and Remco de Pater will reach out to you. On week days within 24 hours! 

Beekenkamp Group Project | Electricity

The electrical installation at Beekenkamp Group

For the new construction at Beekenkamp Group it was decided to have all the grow zones controlled independently. For this reason, Royal Brinkman installed 56 control and grow light panels. A total of 7.8 km of cables were fitted and connected to various main switchboards and distribution switchboards.

Fitting power cables

In order to provide all the desired equipment with electrical power, first 7.8 km of cables were fitted. These were applied to a sand bed, to protect the cables. The cabling was connected to three main distributors. From the main distributor, the power cables were lead to four distribution switchboards in the corridors. This way, the entire company, including offices, is equipped with grid current. Beekenkamp Group expressed the desire to be able to control all 28 grow zones independently. For this purpose, independent control and grow light panels were installed in every zone. For the right electric voltage, four distribution switchboards were mounted in the corridors, that the 56 control and grow light panels were connected with.

Main and distribution switchboards

In the CHP room, three distributors were installed. The distributor HKL-1 offers room for the connection of all power supplies necessary for the greenhouse installation (below distributors in corridors), the irrigation area, offices and the CHP room. For future PV installations, four end groups, as well as a number of spare groups, are available. 

The distributors HKB-1 and HKB-2 serve as main distributors for the entire illumination system, fourteen illumination panels are connected to each of the distributors. A total of 28 grow light panels.

Control and grow light panels

Every compartment has a control panel for the power supply and control of the relevant installations per compartment, so that all compartments remain separate. 28 control panels in total were delivered and mounted, each panel was customized for each unique compartment. All panels are dimensioned similarly though. 
 
A grow light panel was mounted next to each control panel, offering connection options for the grow light per compartment. The grow light panels are executed with the same dimensioning as the control panels, which gives the entirety a uniform appearance. The grow light panels are also suitable for the addition of LED lighting

The panels are mounted to the (inner) front walls of the compartments and fitted all around with cable ducts in which the cables can be laid neatly, towards the correct control or grow light panel.
Contact
Do you have a question or do you want more information? Fill out the contact form and Remco de Pater will reach out to you. On week days within 24 hours!