D-Fuse Extra is a weatherproof diffuse coating that provides maximum diffused light and optimal growth light (PAR) transmission. It contains specially developed pigments that maximise light diffusion and allow for optimal growth light ingress (PAR). D-Fuse Extra is specifically designed for glass, plastic film, polycarbonate and acrylic. Besides, the diffuse coating is very wear-resistant, yet easy to remove with Removit.
D-Fuse Extra does not containy any components that are harmful to the environment.
Advantages D-Fuse Extra
- Weather resistant
- Optimal HAZE factor
- Suitable for all greenhouses
- Easily removable with Removit
Dosage D-Fuse Extra
| Buckets per ha | Shading PAR +/- | % HAZE (diffusitivity) +/- | Lifespan (weeks) +/- | Weather resistance |
| 13 | 9-11% | 95% | 16-20 | Maximum |
Lifespan is measured under average European weather conditions. Extreme weather conditions may slightly affect the values specified in the table. Applying by hand we advise: 17 buckets / hectare because of loss of spray liquid.
Usage D-Fuse Extra
Add the content of the bucket to clean water while stirring. Use sufficient spray liquid to evenly distribute the D-Fuse Extra. The amount of spray liquid partly depends on the spraying method used. An indicative quantity of spray liquid for machine application is 1200 to 1400 litres per hectare and 1500 to 1700 litres per hectare in case of manual application. We recommend continuously or regularly stirring the solution during application. Apply D-Fuse Extra on a clean and dry underground in dry weather conditions.
After the season D-Fuse Extra can be removed quickly, easily and in a responsible manner with Removit.
Caution
Do not use D-Fuse Extra in combination with other screen products. Prevent the product from entering the basin during application or removal. Store frost-free.
» Discover which different diffuse coatings are available