Double hygiene station HC / XL construction
Description
Benefits
- Supplied with certificate of stainless steel used (AISI 1.4301), no use of ferritic steels (400 series) that are magnetic and liable to corrode
- Everything is 100% rounded off jointless for optimal hygiene, no angles or edges where bacteria can originate
- Disinfectants are secured in a locker, so they are not visible and inaccessible for unauthorised persons
- PLC control: each parameter can be set (not accessible for unauthorised persons)
- Meets the highest quality requirements for the food and general industry
- Run-dry protection: no passage when hands have not been cleaned
- The disinfection room is illuminated for ease of use
- The suction pipes for products and nozzles are in stainless steel
- Turnstile fully in stainless steel
- Robust construction and elegant finish
- Durable brushes/little maintenance
- Soft rubber rings
Double hygiene lock HC / XL construction
This "HC/XL" hygiene station is designed for the controlled passage of workers in and out of the work environment.
For complete optimal hygiene, these devices are placed in a so-called hygiene lock, preferably in the passageway to the production areas. The machines are completely made of stainless steel 1.4301 (AISI 304) and equipped with horizontal brushes that clean both shoe soles simultaneously in an easy and efficient way. This hygiene station essentially has two entrances and two exits. The HC/XL is the double-sided version of the URK.
The hand openings for simultaneous hand disinfection are integrated in the machine. By entering both hands together (does not work with only one hand), the disinfection is started by two sensors. After completion of the hand disinfection process, the access barrier is unlocked and one person at a time can pass the rotary cross and proceed to the production area.
The HC/XL hygiene station
- HC/XL: one pair of hand holes for hand disinfection (on both sides, to be used at the passage to production)
- 2 horizontal brushes of 1210mm (on both sides, to be used in the passage to production and when leaving production)
- Access control using rotary cross (on both sides, to be used when entering production (access is granted when hands are disinfected) and when leaving production)
Disinfectants for the hygiene lock
For an optimal use of the hygiene lock one can use Menno Florades and Enno Rapid.
Technical specifications
Type | HC/XL |
KW | 1,20 |
Voltage | 400 |
Diameter brush | 190 |
Length brush | 1210 |
Water supply water drainage | 3/4" DN50 |
Dimensions in mm | 2004 x 1650 x 1550 |
Weight | 350 kg |
To prevent diseases in the greenhouse, it is important to use hygiene stations. View our large assortment of hygiene stations.
Double hygiene station HC / XL construction
Description
Benefits
- Supplied with certificate of stainless steel used (AISI 1.4301), no use of ferritic steels (400 series) that are magnetic and liable to corrode
- Everything is 100% rounded off jointless for optimal hygiene, no angles or edges where bacteria can originate
- Disinfectants are secured in a locker, so they are not visible and inaccessible for unauthorised persons
- PLC control: each parameter can be set (not accessible for unauthorised persons)
- Meets the highest quality requirements for the food and general industry
- Run-dry protection: no passage when hands have not been cleaned
- The disinfection room is illuminated for ease of use
- The suction pipes for products and nozzles are in stainless steel
- Turnstile fully in stainless steel
- Robust construction and elegant finish
- Durable brushes/little maintenance
- Soft rubber rings
Double hygiene lock HC / XL construction
This "HC/XL" hygiene station is designed for the controlled passage of workers in and out of the work environment.
For complete optimal hygiene, these devices are placed in a so-called hygiene lock, preferably in the passageway to the production areas. The machines are completely made of stainless steel 1.4301 (AISI 304) and equipped with horizontal brushes that clean both shoe soles simultaneously in an easy and efficient way. This hygiene station essentially has two entrances and two exits. The HC/XL is the double-sided version of the URK.
The hand openings for simultaneous hand disinfection are integrated in the machine. By entering both hands together (does not work with only one hand), the disinfection is started by two sensors. After completion of the hand disinfection process, the access barrier is unlocked and one person at a time can pass the rotary cross and proceed to the production area.
The HC/XL hygiene station
- HC/XL: one pair of hand holes for hand disinfection (on both sides, to be used at the passage to production)
- 2 horizontal brushes of 1210mm (on both sides, to be used in the passage to production and when leaving production)
- Access control using rotary cross (on both sides, to be used when entering production (access is granted when hands are disinfected) and when leaving production)
Disinfectants for the hygiene lock
For an optimal use of the hygiene lock one can use Menno Florades and Enno Rapid.
Technical specifications
Type | HC/XL |
KW | 1,20 |
Voltage | 400 |
Diameter brush | 190 |
Length brush | 1210 |
Water supply water drainage | 3/4" DN50 |
Dimensions in mm | 2004 x 1650 x 1550 |
Weight | 350 kg |
To prevent diseases in the greenhouse, it is important to use hygiene stations. View our large assortment of hygiene stations.
Hygiene is very important in horticulture. Bacteria, fungi and viruses spread easily and you want to avoid contamination of your crop. A hygiene station provides a guarantee of hygiene before you enter the greenhouse.
Plant diseases and patghogens can be spread in all kinds of ways, eg. Through people, air, water, plant material, insects and tools. Business hygiene occupies itself with repelling and suppressing these diseases and pathogens within your crop.