Pen spring 1.5 mm 16+4 cm conical
Description
Spring pin
You can rotate the spring pin with the helix end on the gauze. The spring pin is then fastened and will not get loose during use, even when harvesting between the mesh. The spring steel is flexible and bendable material. Depending on the type of chrysanthemums, growers can choose to twist a spring pin on each mesh or after a few meshes. This is a matter of trying. The additional production you can achieve with the flowering of walking paths is 10 - 15 branches per year. Spring pin with 2 eyes.
Following the demands from the work field, we have developed a new model, which is equipped with 2 eyes. With the intention of hooking the small ring to the bobbin thread, and the large ring must be hooked like a door-window hook to the adjacent gauze. Resulting in the fact that the gauzes will be pulled towards each other, so the recessed sides are pulled in place and thus make a bridle to which the chrysanthemums can lean. The big eye of the spring pin is closed, so it cannot slide between the wire and hook it.
The length of the spring pins are around 160/170 mm, from the heart of the small eye to the hooking side of the big eye is 160 mm and the outer dimension is 170 mm.
But of course, any other size / length is available.
You will need about 5 pins per bay
Pen spring 1.5 mm 16+4 cm conical
Description
Spring pin
You can rotate the spring pin with the helix end on the gauze. The spring pin is then fastened and will not get loose during use, even when harvesting between the mesh. The spring steel is flexible and bendable material. Depending on the type of chrysanthemums, growers can choose to twist a spring pin on each mesh or after a few meshes. This is a matter of trying. The additional production you can achieve with the flowering of walking paths is 10 - 15 branches per year. Spring pin with 2 eyes.
Following the demands from the work field, we have developed a new model, which is equipped with 2 eyes. With the intention of hooking the small ring to the bobbin thread, and the large ring must be hooked like a door-window hook to the adjacent gauze. Resulting in the fact that the gauzes will be pulled towards each other, so the recessed sides are pulled in place and thus make a bridle to which the chrysanthemums can lean. The big eye of the spring pin is closed, so it cannot slide between the wire and hook it.
The length of the spring pins are around 160/170 mm, from the heart of the small eye to the hooking side of the big eye is 160 mm and the outer dimension is 170 mm.
But of course, any other size / length is available.
You will need about 5 pins per bay