0 product(s)
progress indicator
Adding product...
The online platform for horticulture Personal advice from our specialists More than 25.000 products More than just a webshop
Logo image

CuPro 25 l

Do not delete this link

CuPro 25 l

Item no. 181801221
can = 25 liter
Price available on request. You can send us your request by clicking on the button below.
Your request will be sent to your contact person. On working days we will contact you within 24 hours.


Cupro is a liquid, organic corrosion inhibitor and is used for corrosion protection of copper and copper alloys in recirculating cooling water, heating and district heating systems.

The operation of cupro is in twofold:
1. cupro forms a good, contiguous and corrosion-protective film layer, which consists of a chemically highly stable cuprous copper complex on the metal surface.
2. Copper ions in solution, due to corrosion, create copper deposits on materials (copper plating). Copper Plating can cause serious corrosion and damage on iron, steel and aluminum in particular. Cupro is able to form insoluble complexes with copper ions, so that these materials can be protected from copper plating, and so galvanic corrosion.

Dosage instructions
For closed heating and district heating systems:
- The starting dose is 400 ml / m3 system content (200 ppm).
- The maintenance dose is 200 ml / m3 of water supplementation.
Cupro can be added without difficulty to alkaline water treatment products and are therefore dosed into the system in conjunction with this product by means of a metering pump. Cupro can not be mixed with neutral- or acid products.

For recirculating cooling systems
The dosage is dependent on the operational parameters of the cooling system on.

Cupro contains, 2-4% sodium hydroxide solution and is highly alkaline. Wear chemical-resistant gloves and eye or face protection. In the case of spillage on clothes or skin, rinse immediately with plenty of water. If Cupro comes into contact with eyes, contact a doctor.
Spillage using sand or other absorbents and dispose of as chemical waste. Where spill clean with plenty of water, flushing water discharged into the drain.

Physical properties

Appearance Clear light red-brown solution
pH 11.0
Density 1070 kg / m3

For each crop protection chemical or biocide product the user must comply with the local legal conditions and regulations. Use crop protection products and Biocides safely. Always read the label and the safety data sheet.

This product will not necessarily be approved or authorized in your country.
Please check with the appropriate authority in your country as to whether you may legally use this product.
Do not delete this link