Home ​​​​>​​​​ Knowledge Center​​​​

Did you know that cleaning and disinfecting are not the same thing? Cleaning is the removal of dirt such as dust, dirt or grease. Cleaning does not ensure that micro-organisms are killed. Disinfection, on the other hand, is the killing, inactivation or removal of pathogenic organisms, such as bacteria and viruses. By combating the micro-organisms, they cannot spread any further.

For optimal hygiene, make sure to first clean the material or surface to be cleaned with a cleaning product. This removes dirt and grease. By removing the dirt and grease, you can easily reach the stubborn bacteria, moulds and germs below with a disinfectant. The second step is disinfection. With a disinfectant you can remove stubborn bacteria, fungi and germs. A detergent does not do this. A surface may appear clean after using a detergent, but this does not mean that the germs have died. 

Disinfection is becoming increasingly important in the horticultural sector. With a view to legislation, environmental friendliness and sustainability, growers want to make less and less use of crop protection products. This is only possible when growers disinfect in a thorough and correct way. Good disinfection ensures that no pathogens remain in the crop, which reduces the risk of recontamination. Do not underestimate the importance of good disinfection!

After the crop has been cleared, you can choose to clean and disinfect the pull core fabric with a fabric washer. This is how diseases, bacteria and viruses are killed. It is especially important if you put the pull core fabric in the greenhouse at the beginning of the cultivation. If you do not insert the cloth until the crop is changed, then cleaning and disinfection of the canvas is in principle not necessary.

​​​​Waste handling machine Hopper.​​​​

Well cleaned, clean glass allows more light into the greenhouse. Therefore you should clean the glass of the greenhouse regularly - from the inside as well as from the outside. The easiest way to do this is when changing crops, because then you don't have to take the crop into account. Discover more information about glass cleaners and an explanation of the correct working method.

Smooth and vertical surfaces - such as greenhouse stands, glass, boxes and trolleys - are often difficult to clean and disinfect because the product runs off immediately after application. The best way to do this is to use foam. This attaches better, which can influence the effect time. It also has a crawling feature, which allows it to reach hard-to-reach areas such as corners and cracks.

The plugs of the drip system are usually used for several years. That is why you need to disinfect them during the crop rotation. After removing them from the greenhouse during clearing, you can put them in a container with hydrogen peroxide, so that they are disinfected.

In order to prevent pathogens from entering the new crop via the water, it is important to disinfect the water in silos and basins. Also for this you can make the best use of Huwa-San. This is a product based on hydrogen peroxide, which leaves no residue in the water and is therefore more environmentally friendly than chloride, for example. After you have disinfected the water, you can safely use it in the new cultivation. Always have a specialist advise you about this beforehand. If in the previous crop you had to deal with crazy roots, for example, then a more thorough approach is needed.

Can't find your answer? Fill out the contact form and our specialist Martin Meuldijk will get back to you. On weekdays, even within 24 hours.