​​​​​​​​Find answers to your question in our Knowledge Center. 600+ articles, written by our specialists.​​​​

• Point jet nozzle (or round jet nozzle)
• Power nozzle
• Flat nozzle

For a strong cleaning effect on a small surface, use a point or round jet nozzle. This nozzle sprays the water with great force into a thin jet, so that dirt can easily be removed. When using a point jet nozzle, it is important that you do not work too quickly, but also not too slowly. If you go too fast, you will see circles on the cleaned material. If you go too slowly, the high pressure can cause damage to the cleaned surface. A point jet nozzle is not suitable for cleaning every material. For example, wood can quickly be damaged by the high force.

A power nozzle - just like a point jet nozzle - sprays the watter out into a thin jet with great force. However, the difference between a point jet nozzle and a power nozzle is that a power nozzle covers a much larger area, which speeds up cleaning. In fact, the power nozzle combines the power of a point jet nozzle with the surface performance of a flat nozzle - even though the cleaner has less cleaning power than the point jet nozzle. When using the power nozzle, also consider that you are not going too fast or too slow and that you could damage softer materials.

Note: Never raise a point jet nozzle or a power nozzle when it is under pressure. Both nozzles contain a ball in the lance. If you point the lance upwards while spraying, this ball may break.

A flat nozzle sprays out the water under lower pressure. This makes this nozzle more suitable for cleaning delicate materials. The dirt is removed from the surface with less risk of damage than with the point jet nozzle and power nozzle - provided you use the high-pressure cleaner correctly. For best results, keep 30 centimetres distance from the surface to be cleaned. When you spray from closer, damage can occur; when you spray from further away, the jet loses its power and the result is less. You can also use a flat nozzle in combination with a cleaning or disinfecting agent.

For cleaning large floor areas, it is best to use a floor cleaner or a terrace brush. It contains two nozzles, so you can clean a larger surface in one go. Also, the water does not splash when using a floor cleaner. Make sure that the dirt is removed from the cleaned surface after the cleaning process so that it cannot be pulled back in again. You can do this with a broom, but you can also spray the surface again with a flat nozzle.

When you clean your company cars, you don't want scratches to occur. In this case it is better not to mount a nozzle on the high-pressure cleaner. It is advisable to use a washing brush with soft hair.

Can't find your answer? Fill out the contact form and our specialist Michael Visser will get back to you. On weekdays, even within 24 hours.

Which types of spray nozzles are available?
There are different types of spray nozzles available for different use. It’s important to choose the right nozzle to get the best result because spray nozzels determine the volume, drop size and spray pattern.Our specialist gives you information about Split top nozzle, Swirl nozzle and Floodjet nozzle.

How do you choose the right spray gun?
Different tasks require different spray guns. But there are different spray guns per application as well. We help you choose the right spray gun.

Different spraying techniques in the glass horticulture
Plant protection products can be applied in a crop using various spraying techniques. When choosing a spraying technique, it is important to know that not every spraying technique is suitable for every crop.