Shop / Knowledge Center / Mechnical equipment / Spray table for an Alumax spray gun

Spray table for an Alumax spray gun

Spray table for an Alumax spray gunWith (chemical) crop protection products, it is best to use them as efficiently as possible to minimize waste. To accurately calculate how much spray fluid you spray when using an Alumax spray gun, you therefore need to be aware of the output of the spray gun in combination with various types of nozzles. Below is the spray chart for an Alumax spray gun. With this information you can determine the amount of spray liquid you need and choose the right nozzle.

Alumax spray gun with various nozzles
(All values are in litres per minute)
   Spraying pressure
Diameter in mm
  15 bar
Conic / Straight
30 bar
Conic / Straight 
50 bar
Conic / Straight
 1,00litre per minute1,82,32,63,23,44,1
spray angle
30° -35° 40° 
throw in metres
2,15,02,45,62,56,3
 1,20litre per minute
2,43,03,44,24,45,4
spray angle
35°-40°-45°-
throw in metres
2,35,82,76,13,16,3
 1,50litre per minute
3,44,54,86,46,28,3
spray angle
40°-45°-50°-
throw in metres
2,66,63,07,03,57,7
 1,80litre per minute
3,96,95,59,87,112,7
spray angle
50°-55°-°60
-
throw in metres
2,97,03,37,54,08,3
 2,00litre per minute
4,58,36,311,78,115,1
spray angle
55°-60°-65°-
throw in metres
3,17,53,58,04,58,9
 2,30litre per minute
5,311,47,516,19,720,8
spray angle
60°-65°-75°-
throw in metres
3,48,04,08,54,89,3


Questions about the spray table for an Alumax spray gun
Do you have any questions about the spray chart for an Alumax spray gun, or would you like to get advice? Then contact product specialist Michael Visser, or ask your question using the form below.


Contact form