Dosatron is a water driven dosing pump.
The Dosatron, connected in the water network, uses the water pressure as the only driving force for the motor piston. This drives a piston, which sucks up the concentrate in the set percentage and then mixes it with driving water. The solution thus obtained is then distributed through the pipes. The amount of concentrate injected is at all times proportional to the amount of water passing through the Dosatron, even if fluctuations in water pressure or changes in flow occur.

• Continuously adjustable from the outside.
• Proportional dosing, so always the set percentage, regardless of flow or pressure.
• Injection: D3RE10 is adjustable from 1 - 10% 
• Equipped with a Bypass (on and off)
• Application: when you want to suck in higher concentrations
• Injection range: 1 - 10 % [1:100 - 1:10].
• Concentrated additive injection (medium): 0.1 l/h - 300 l/h
• Water flow range: 10 l/h - 3 m3/h
• Working pressure: 0.5 - 6 bar
• Connections: 3/4' external thread
• Hose : PVC Ø 16x22mm - Length 1,75m
• AFP type with alkaline seals for alkaline additives