Everything for horticulture Personal advice from our specialists Worldwide delivery of 30 000 products
Search your products below, and request a quote within 30 seconds
Logo image

Car Polish & Coat 250 ml

Do not delete this link

Car Polish & Coat 250 ml

Item no. 370012386
box = 12 piece(s)
On working days your request will be handled within 24 hours by the responsible account manager for your region. Royal Brinkman does not deliver to consumers or companies outside horticulture.
- Personal advice from our specialists
- Worldwide delivery of horticultural supplies
- Request a quotation within 30 seconds


Car Polish & Coat is a preventive and corrective protection against aging and chalking of car paints. Car Polish & Coat is silicone free. It contains a fine polishing emulsion for a clean and shiny result. Car Polish & Coat is a time-saving car paint polisher. It is based on a petroleum system with brightening ingredients for cleaning and polishing car paint. Once the car paint is treated with Car Polish & Coat it will offer a 2-3 years gloss finish on the car paint.

Car Polish & Coat cleans, polishes and seals in one treatment. Car Polish & Coat is used for cleaning and coating of car paints which have been subject to contamination and/or discoloration exposed through the years. It contains a high concentration of nanoparticles for optimal protection. Dirt no longer adheres to the surface and is easy to remove with water in combination with Conditioner.


  • Protects against aging, yellowing and chalking
  • Dirt no longer adheres to the surface and is easy to remove
  • Less maintenance and cleaning
  • Easy application


  • Car paints

Main features

  • Treated parts are well protected against the adhesion of dirt
  • UV filter prevents discoloration
  • Discoloured parts gets in most cases their original colour
  • Product is silicone free
  • The applied nano coating provides a very long lasting protection against pollution

Processing advice
To remove any deposits and/or fats, we recommend to follow the following steps:


  • Shake Cleaner before use
  • Apply by spraying
  • Clean with a soft cloth, sponge or brush. If necessary, rinse with water and dry by pulling large areas with wiper


  • After drying, apply Car Polish & Coat preferably with a soft cotton cloth or sponge. Bring a little of the product to the cloth or sponge and wipe the handle part with circular motion, eventual mechanically is optional.
  • Surface to dry approximately 45 minutes.
  • After drying, the surface can be wiped off if desired with a cotton cloth.

Colour and Shine

  • Beige
  • Dries colourless (no cover)
  • Invisible

On a smooth surface consumption is about 100 ml per 12 square meter (one layer)*
*This indicated consumption is a reference value. Depending on the nature of the surface and the processing it may vary. Exact values can only by determined per project through plots.

Do not delete this link