Nutlock knee .20x20mm inline
Description
Nutlock fittings combine the advantages of varbconnectors and clamp fittings. The PE hose is slid over the loose grip and secured with the swivel. No rings are needed for the seal on the hose. Mounting and dismounting of the hose when changing crops is therefore easy: the grip and swivel remain on the hose and do not get lost.
Characteristics
- Slim design
- Flexible system: afterwards tighten or remove swivel and grip
- Available as coupling, T-strap or as end set
- Also usable for a 17 mm hose
- Resistant to common fertilisers used in horticulture
- Waterproof assembly
- Internal or external thread
Technical specifications
Dimensions | for 16-25 mm PE hose and inline drip hose |
Connection | 1/2 - 1'' BSPT |
Maximum pressure | 8 bar (20°C) |
Nominal pressure | 6 bar |
Material |
Polypropylene (body and gland) & PBT (grommet) |
Recommended wall thicknessPE
Nutlock-fitting (mm) | Wall thickness hose(mm) |
16-17 | 0,7 -1,5 |
20 | 1,0 - 1,9 |
25 | 1,4 - 1,9 |
Nutlock knee .20x20mm inline
Description
Nutlock fittings combine the advantages of varbconnectors and clamp fittings. The PE hose is slid over the loose grip and secured with the swivel. No rings are needed for the seal on the hose. Mounting and dismounting of the hose when changing crops is therefore easy: the grip and swivel remain on the hose and do not get lost.
Characteristics
- Slim design
- Flexible system: afterwards tighten or remove swivel and grip
- Available as coupling, T-strap or as end set
- Also usable for a 17 mm hose
- Resistant to common fertilisers used in horticulture
- Waterproof assembly
- Internal or external thread
Technical specifications
Dimensions | for 16-25 mm PE hose and inline drip hose |
Connection | 1/2 - 1'' BSPT |
Maximum pressure | 8 bar (20°C) |
Nominal pressure | 6 bar |
Material |
Polypropylene (body and gland) & PBT (grommet) |
Recommended wall thicknessPE
Nutlock-fitting (mm) | Wall thickness hose(mm) |
16-17 | 0,7 -1,5 |
20 | 1,0 - 1,9 |
25 | 1,4 - 1,9 |