Request a quote within 30 seconds Personal advice from our specialists More than 30.000 products Worldwide delivery
   Cart   
0
progress indicator
Adding product...
Questions about the webshop? Click here or call us on: +31 174 446 100
Logo image

Capillary 3.2 x 1.0 mm 85cm

Do not delete this link

Capillary 3.2 x 1.0 mm 85cm

Item no. 017102881
100 pieces = 100 piece(s)
Your request will be sent to your contact person. On working days we will contact you within 24 hours.

Description

The capillary dripper is one of the first type of drippers. The capillary dripper capacity is determined by: the operating pressure, length and the inner diameter of the capillary. This results in a wide variety of capacities. The flow in the capillary is not turbulent. The capacity per dripper can vary considerably (higher CV value), especially when the drippers get older and thus become more polluted. The clogging sensitivity is higher than of its subsequent successors, such as: the cobra, woodpecker and Kameleon

A new way of feeding the capillary dripper is used from 2015. A letter coding indicates the inner diameter. A letter (A,B,C,D,E) is printed on the microtube corresponding to the coding and capacity table listed below. Capillary drippers supplied before 2015 are given a number (1,2,3,4) This shows the capacity at 0.5 bar.

Characteristics

  • Pressure sensitive basic dripper
  • 5 encodings (A, B, C, D, E)
  • Lowest uniformity in comparison to modern drippers
  • Straight cut microtube instead of oblique (from 1-1-2015) for better connection to the screwdriver

Application
Various crops with relative short bed distances.

Technical data

Material PE (only available in black)
Advice working pressure 0,5 bar (0,25-1 bar)
Filtration 80 - 100 micron (main filtration)
130 micron (crane set)
Capillary length Standard: 60, 85 and 100 cm
On request: 40 - 100 cm (with different capacities, see table)
Main hose diameter White/black and black
Main hose diameter 16 / 20 / 25 32 cm
Punch distance

5 - 300 cm

Coding microtubes
Type A = 3,2 x 0,6 (1 l/u at 85 cm at 0,5 bar)
Type B = 3,2 x 0,7 (1,5 l/u at 85 cm at 0,5 bar)
Type C = 3,2 x 0,8 (2 l/u at 85 cm at 0,5 bar)
Type D = 3,2 x 0,9 (3 l/u at 85 cm at 0,5 bar)
Type E = 3,2 x 1,0 (4 l/u at 85 cm at 0,5 bar)

Installation & maintenance

  • For "General use advice for drip systems" read the tips on storage, construction and use.
  • The capillary drippers can be cleaned with acid, peroxide and chlorine agents and/or suction (see 'cleaning and points of interest for drip systems")
Do not delete this link