Ölflex Classic 110 32G1,5
Description
Ölfex classic 110
PVC control cable, VDE registered, oil resistant and flexibel for various applications.
Features
- Torsion resistant
- Cable run
- Oil resistant
- Good chemical resistance
- High electrical performance thanks to 4000v test voltage
Application
For fixed installations and accasionel bending. To be used in dry or humid areas subjected to average mechanical stress. Suitable for drip loop applications in wind turbines.
Tested in cable runs with maximum travel of 5m and 0.2 .. 1 million bending cycles. Valid for cables of 0,5 to 2,5 mm² and 2 to 7 conductors.
Layout
- Fine stranded bare copper
- PVC isolation LAPP P8/1
- Conductors folded in layers
- Sheating: PVC,Gray (similar to RAL 7001)
Technical data
Classification ETIM 5 | ETIM 5.0 Class-ID: EC000104 ETIM 5.0 class discription: control cable |
Classification ETIM 6 | TIM 6.0 Class-ID: EC000104 ETIM 6.0 Class-Description: control cable |
Conductor sertification | Black witth with numbers according to VDE 0293-1 |
Condcutor layout | Fine wire according to DIN EN 60228 (VDE 0295), Class 5 / IEC 60228 Class 5 |
Minimum bending radius | When moved accasionally: 10 x outside diameter(AD) In cable runs: 15 x outside diameter Solid installation: 4 x outside diameter |
Nominal voltage | U0/U: 300/500 V |
Protective earth conductor | G = with yellow-green(YE-GR) protected conductor X = without yellow-green |
Temperature range | Incidental bending: -15°C tot +70°C In cable runs: -5°C tot +70°C Solid installation: -40°C tot +80°C |
Ölflex Classic 110 32G1,5
Description
Ölfex classic 110
PVC control cable, VDE registered, oil resistant and flexibel for various applications.
Features
- Torsion resistant
- Cable run
- Oil resistant
- Good chemical resistance
- High electrical performance thanks to 4000v test voltage
Application
For fixed installations and accasionel bending. To be used in dry or humid areas subjected to average mechanical stress. Suitable for drip loop applications in wind turbines.
Tested in cable runs with maximum travel of 5m and 0.2 .. 1 million bending cycles. Valid for cables of 0,5 to 2,5 mm² and 2 to 7 conductors.
Layout
- Fine stranded bare copper
- PVC isolation LAPP P8/1
- Conductors folded in layers
- Sheating: PVC,Gray (similar to RAL 7001)
Technical data
Classification ETIM 5 | ETIM 5.0 Class-ID: EC000104 ETIM 5.0 class discription: control cable |
Classification ETIM 6 | TIM 6.0 Class-ID: EC000104 ETIM 6.0 Class-Description: control cable |
Conductor sertification | Black witth with numbers according to VDE 0293-1 |
Condcutor layout | Fine wire according to DIN EN 60228 (VDE 0295), Class 5 / IEC 60228 Class 5 |
Minimum bending radius | When moved accasionally: 10 x outside diameter(AD) In cable runs: 15 x outside diameter Solid installation: 4 x outside diameter |
Nominal voltage | U0/U: 300/500 V |
Protective earth conductor | G = with yellow-green(YE-GR) protected conductor X = without yellow-green |
Temperature range | Incidental bending: -15°C tot +70°C In cable runs: -5°C tot +70°C Solid installation: -40°C tot +80°C |