Partition Amplifier - MINI MCR-2-UI-UI-PT
Description
3-way-partition amplifier with plug-in connection and calibrated measuring range for galvanic separation of uni- and bipolar analogue signals. Input/output configurable via DIP switches/ Push in connection technology, standard configuration.
The 3-way separator amplifier with plug-in connection and calibrated measuring range circuit configured via DIP switches is used for galvanic separation, conversion, amplification and filtering of unipolar and bipolar standard and standard signals
At the input side are the following analogue standard signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V or 10 ... 10 V, and the signals 2 ... 10 V, 0 ... 20 V, 4 ... 20 V, 0 ... 24 V, 0 ... 30 V, -5 ... 5 V, -20 ... 20 V, -24 ... 24 V, -30 ... 30 V and -20 ... 20 mA available. At the output side are the following signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V, -10 ... 10 V and -5 ... 5 V possible. A compensation after a measurement range is not necessary. The measurement converter supports Fault monitoring and NFC communication.
Partition Amplifier - MINI MCR-2-UI-UI-PT
Description
3-way-partition amplifier with plug-in connection and calibrated measuring range for galvanic separation of uni- and bipolar analogue signals. Input/output configurable via DIP switches/ Push in connection technology, standard configuration.
The 3-way separator amplifier with plug-in connection and calibrated measuring range circuit configured via DIP switches is used for galvanic separation, conversion, amplification and filtering of unipolar and bipolar standard and standard signals
At the input side are the following analogue standard signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V or 10 ... 10 V, and the signals 2 ... 10 V, 0 ... 20 V, 4 ... 20 V, 0 ... 24 V, 0 ... 30 V, -5 ... 5 V, -20 ... 20 V, -24 ... 24 V, -30 ... 30 V and -20 ... 20 mA available. At the output side are the following signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V, -10 ... 10 V and -5 ... 5 V possible. A compensation after a measurement range is not necessary. The measurement converter supports Fault monitoring and NFC communication.