With these multi-jet water meters (type M-MS) (1/2-2”) with a screw thread connection, the water passes through the propeller via several inputs (multi jet). The propeller is loaded, symmetrically, which reduces the amount of wear and tear. The multi-jet is insensitive to turbulence in the pipes. A straight pipe in front and behind the meter is not necessary. However, the meter must be placed horizontally. Multi-jet meters are used during irrigation and for drainage systems, for example in the industry. As an option there is the possibility to equip the water meter with a pulse head for automatic registration of quantity and flow. It is also possible to obtain the water meter as an option in a ‘hot water version’ type MH. This is resistant to temperatures up to 90 °C.

The Single-jet water meter (type SO (1/2”) with screw thread connection is a water meter with single inlet of water to the propeller (min. 15 cm straight tube before and 8 cm after the meter required). All water meters of type M and S are supplied with brass couplings. The MS40 is the improved model of the 1.1/2” M40. The accuracy at low capacities (Class D) and the resistance is clearly improved. In the loo of 2006 and 2007 all Multi-jet meters will be replaced by the MS-series.

Technical information

Technical specifications Multi-jet (M) water meter