Tank liner polyextra
| Diameter x Height | 15,67 x 4,57 m |
| Capacity | 880 m3 |
| Thickness | 0.6 mm |
Tank liner polyextra is a polyolefin film based on PP (polypropylene), is available in the thickness 0.6 mm. contains no plasticizers but because of specific applications its yet very flexible and easy to process.
All tanks are delivered in accordance with European guidelines.
| Materials provided by: | EN10204/ DIN 50049/ ISO 404 |
| Mounting equipment by: | IS1367 Part 3-2002 |
| Galvanized coating according to: | EN10346/ EN ISO 1461 |
Strengths: - Many positive experiences
- Good chemical resistance
- Suitable for storage of manure and drainage water
- Can be used for storage of irrigation water with conventional additives
- Cold resistance can be processed at low temperatures, even below 0 ° C, and / or be taxed
- Heat resistance very heat resistant, permissible continuous load 70 ° C
- Is rigid no shrinkage
- Contains no plasticizers
- Suitable for applications in drinking water and food industry
Weaknesses:
- Can only be welded with a hand dryer or special welding machines
- Minor repairs can be "glued" to the special repair kit
- is less well against chlorine, primary and PH4 is not advisable
Warranty (in Europe)
Application silo linings for storage of irrigation water possibly with additives 10 years