Everything for horticulture Personal advice from our specialists Worldwide delivery of 30 000 products
Search your products below, and request a quote within 30 seconds
Logo image

Car Polish & Coat 5 L

Do not delete this link

Car Polish & Coat 5 L

Item no. 370012436
On working days your request will be handled within 24 hours by the responsible account manager for your region. Royal Brinkman does not deliver to consumers or companies outside horticulture.
- Personal advice from our specialists
- Worldwide delivery of horticultural supplies
- Request a quotation within 30 seconds


Car Polish & Coat is a preventive and corrective protection against aging and chalking of car paints. Car Polish & Coat is silicone free. It contains a fine polishing emulsion for a clean and shiny result. Car Polish & Coat is a time-saving car paint polisher. It is based on a petroleum system with brightening ingredients for cleaning and polishing car paint. Once the car paint is treated with Car Polish & Coat it will offer a 2-3 years gloss finish on the car paint.

Car Polish & Coat cleans, polishes and seals in one treatment. Car Polish & Coat is used for cleaning and coating of car paints which have been subject to contamination and/or discoloration exposed through the years. It contains a high concentration of nanoparticles for optimal protection. Dirt no longer adheres to the surface and is easy to remove with water in combination with Conditioner.


  • Protects against aging, yellowing and chalking
  • Dirt no longer adheres to the surface and is easy to remove
  • Less maintenance and cleaning
  • Easy application


  • Car paints

Main features

  • Treated parts are well protected against the adhesion of dirt
  • UV filter prevents discoloration
  • Discoloured parts gets in most cases their original colour
  • Product is silicone free
  • The applied nano coating provides a very long lasting protection against pollution

Processing advice
To remove any deposits and/or fats, we recommend to follow the following steps:


  • Shake Cleaner before use
  • Apply by spraying
  • Clean with a soft cloth, sponge or brush. If necessary, rinse with water and dry by pulling large areas with wiper


  • After drying, apply Car Polish & Coat preferably with a soft cotton cloth or sponge. Bring a little of the product to the cloth or sponge and wipe the handle part with circular motion, eventual mechanically is optional.
  • Surface to dry approximately 45 minutes.
  • After drying, the surface can be wiped off if desired with a cotton cloth.

Colour and Shine

  • Beige
  • Dries colourless (no cover)
  • Invisible

On a smooth surface consumption is about 100 ml per 12 square meter (one layer)*
*This indicated consumption is a reference value. Depending on the nature of the surface and the processing it may vary. Exact values can only by determined per project through plots.

Do not delete this link