Everything for horticulture Personal advice from our specialists Worldwide delivery of 30 000 products
Search your products below, and request a quote within 30 seconds
Logo image

Circukon filter UDI 3" 100 Micron 160x350mm

Do not delete this link

Order your spare parts at Hortispares

Circukon filter UDI 3" 100 Micron 160x350mm

Item no. 050708030
On working days your request will be handled within 24 hours by the responsible account manager for your region. Royal Brinkman does not deliver to consumers or companies outside horticulture.
- Personal advice from our specialists
- Worldwide delivery of horticultural supplies
- Request a quotation within 30 seconds

Spare parts


Circukon filter UDI 3" 100 micron

Highly resistant steel with plastic provide a filter that fits many purposes. The UDI Circukon PVC filter has a filter element with a stainless steel filter mesh of 75 to 800 microns. The dirt is collected continuously during operation, so that there is nog increase in the differential pressure. This is accomplished by a specially designed vertebra plate with four oblique drilled holes. The inflow speed is optimized by removing  or asserting plugs.

There are many applications possible due to a high flow rate difference per hole, the entire filter area is optimally utilized by a uniquely designed spiral groove under the filter gauze. The dirt-collecting space is a part of the filter element. The conical shaped inlet prevents backflow of the dirt. The filter cover is light and easy to handle.

The waste outlet can be automated in a simple manner. In order to increase the dirt removal capacity, the cross-flow can be applied to the filter. There’s a comprehensive program of joints and shortcuts available for the assembly of the units (from the same supplier)


  • Recirculation systems
  • Cooling water processes
  • Washwater cleaning foodindustry
  • Basin water filtration
  • Irrigation systems

In preparation for the coating, the filters are provided with a special layer of zinc phosphate. This treatment brings about a good adhesion of the coating and protects it against corrosion from the inside. Thereafter, the polyester coating is applied electrostatically, both internally and externally. After this process they’re hardened in the oven. The overall process consists of seven steps, and results in a perfect coating with a thickness of about 120 microns.

In-line filter housing, downwardly faced dirt-collecting space in the filter element.


  • Polyester coated steel
  • Neoprene rubbers
  • Nylon vertebral plate 
  • PVC filterelement with stainless steel filter gauze

Technische gegevens

Maximal pressure10 barConnection3"
Maximal recommended working pressure8 barCapacity16,5 - 45 m3/h
Recommended ∆P0,25 - 0,5 barHoles8x Ø 18
Flush water2 - 5 LiterWeigth29 Kg
PH resistant5 - 9

Do not delete this link