Lowara submersible pump DOC3GW 230V 0,3 kW (AGW floatswitch)
Description
The DOC series of submersible pumps is a small series of submersible pumps for light duty applications. The pump is available in a 1-phase and a 3-phase version. The 1-phase pumps are available with or without a float. When using 1-phase 230 Volt pumps in permanent installations, we recommend the use of our plug/contra plug with thermal protection. This for optimal security in case of jamming (contamination in pump housing).
The pump can be used for:
- Emptying of small wells and rainwater tanks
- Pumping of leakage water and drainage water
- Irrigating gardens with clean water
- Emergency pump for water problems in basements and underground areas
Version
Doc3 with Agma W float (1-phase / VX=Vortex)
The Lowara bar float has been replaced by the Agma W-float for this series
Specifications
- Capacity from 1,5 to 8,1 m³/h
- Head from 2 to 6.3 m³/h
- Maximum immersion depth 5 metres
- Liquid temperature up to 40 °C
- Noryl pump housing
- Duct or vortex impeller
- Pressure connection 1¼"
- Free passage of fixed parts of Ø 10 mm (Ø 20 mm VX version)
- Motor power P2 from 0.23 to 0.55 kW
- Insulation class B
- 10 meter cable
- Not suitable for continuous use
Lowara submersible pump DOC3GW 230V 0,3 kW (AGW floatswitch)
Description
The DOC series of submersible pumps is a small series of submersible pumps for light duty applications. The pump is available in a 1-phase and a 3-phase version. The 1-phase pumps are available with or without a float. When using 1-phase 230 Volt pumps in permanent installations, we recommend the use of our plug/contra plug with thermal protection. This for optimal security in case of jamming (contamination in pump housing).
The pump can be used for:
- Emptying of small wells and rainwater tanks
- Pumping of leakage water and drainage water
- Irrigating gardens with clean water
- Emergency pump for water problems in basements and underground areas
Version
Doc3 with Agma W float (1-phase / VX=Vortex)
The Lowara bar float has been replaced by the Agma W-float for this series
Specifications
- Capacity from 1,5 to 8,1 m³/h
- Head from 2 to 6.3 m³/h
- Maximum immersion depth 5 metres
- Liquid temperature up to 40 °C
- Noryl pump housing
- Duct or vortex impeller
- Pressure connection 1¼"
- Free passage of fixed parts of Ø 10 mm (Ø 20 mm VX version)
- Motor power P2 from 0.23 to 0.55 kW
- Insulation class B
- 10 meter cable
- Not suitable for continuous use