Lowara submersible pump DIWA05A 0,55kW
Description
Stainless steel submersible pumps for (light) contaminated water. The diffuser plate is covered with a wear resistant polyurethane resin, which together with the stainless steel parts ensrees that the pump can operate under difficult conditions and with abrasive fluid. Large number of applications, from drainage of slots, gaps and dwellings, to the pumping of wastewater from washing machines and washing streets. Can also be used for regular drainage of cellars, for emergency landing and for irrigation purposes
When using 1 phase 230 volt pumps, in permanently installed installations, we recommend using our thermal/plug connector with thermal protection. This ensures optimum safety when jammed (pollution in pump housing) and / or overheating.
Declaration abbreviations
A: with float switch
T: 3-phase pump
SG: without float switch
A/GT: met staafvlotter 1-fase 230 Volt
Technical specifications
Capacity | 6 up to 25 m³/h | Permeable | Free passage of solids Ø 8 mm |
Head height | 4 up to 17 mwk | Motor power | P2 of 0,55 up to 1,5 kW |
Maximum immersion depth | 7 meter | Isolation class | F |
Fluid temperature | Maximal 50 °C | Cable | 10 meter |
Pump house | SS and impeller | Floater | Ball or tube floater (only at the first phase) |
Impeller | Half open | Suited for | Continious use of the floater |
Press valve | 1½” |
Lowara submersible pump DIWA05A 0,55kW
Description
Stainless steel submersible pumps for (light) contaminated water. The diffuser plate is covered with a wear resistant polyurethane resin, which together with the stainless steel parts ensrees that the pump can operate under difficult conditions and with abrasive fluid. Large number of applications, from drainage of slots, gaps and dwellings, to the pumping of wastewater from washing machines and washing streets. Can also be used for regular drainage of cellars, for emergency landing and for irrigation purposes
When using 1 phase 230 volt pumps, in permanently installed installations, we recommend using our thermal/plug connector with thermal protection. This ensures optimum safety when jammed (pollution in pump housing) and / or overheating.
Declaration abbreviations
A: with float switch
T: 3-phase pump
SG: without float switch
A/GT: met staafvlotter 1-fase 230 Volt
Technical specifications
Capacity | 6 up to 25 m³/h | Permeable | Free passage of solids Ø 8 mm |
Head height | 4 up to 17 mwk | Motor power | P2 of 0,55 up to 1,5 kW |
Maximum immersion depth | 7 meter | Isolation class | F |
Fluid temperature | Maximal 50 °C | Cable | 10 meter |
Pump house | SS and impeller | Floater | Ball or tube floater (only at the first phase) |
Impeller | Half open | Suited for | Continious use of the floater |
Press valve | 1½” |