Everything for horticulture Personal advice from our specialists Worldwide delivery of 30 000 products
Search your products below, and request a quote within 30 seconds
Logo image

control cabinet single cores 4 qmm wit

Do not delete this link

control cabinet single cores 4 qmm wit

Item no. 080202525
roll = 100 meter
On business days your request will be handled within 24 hours by the responsible account manager for your region. Royal Brinkman does not deliver to consumers or companies outside horticulture.
- Personal advice from our specialists
- Worldwide delivery of horticultural supplies
- Request a quotation within 30 seconds


The single-layer PVC insulated, European hook-up wire „H07V-K“ is a flexible single-core without nylon jacket, for static, appliance internal laying, e. g. for
control cabinet internal wiring, for static installation in electrical installation conduits/tubes/ducts laid on or under plaster, in closed installation channels
or in similar, closed systems. However, these cables must not be installed directly on housings, racks, files, shelves, cupboards, assembly groups, trenches,
troughs, conduits, tubes, pipes or ducts in a touchable way. According to harmonisation document HD 516, H07V-K is suitable for protected, static installation
in or on lighting equipment or control units for voltages up to 1000 V AC or 750 V DC against ground. Contact with water or chemically claiming substances,
such as oil, must be strictly avoided. In general, H07V-K can be used for the laying in electrical installation conduits/tubes/ducts, openable electrical
installation channels, closed electrical installation channels as well as for the wiring inside of devices, tools, appliances, machines and equipment.
Anyway, the normal temperature range must be complied with – the maximum, permitted conductor temperature amounts to +80°C. In case of operation
in conjunction with other H07V-K, other cables or sets inside electrical installation conduits/tubes/ducts/pipes/channels, a single H07V-K’s conductor
temperature also depends on the heat loss of further, possibly installed H07V-K, other cable types and miscellaneous sets which parallel inside there, which
each single H07V-K can get in physical contact with and which heat up the internal atmosphere by means of running, electrical current (please, see HD
516, HD 384.5.523 and IEC 60364-5-523 for current ratings and correction factors). Such kind of clustering of cables implies the attention to the requirement
that the upper conductor and surface temperature of the weakest cable, as regards the upper continuous conductor temperature limit, as part of the
cluster, which can be H07V-K by all means, shall not be exceeded.
Do not delete this link