The CapiNet is a PE tube with cast-in Netafim labyrinth. The CapiNet is much less sensitive to clogging than a capillary tube because of its larger inner diameter of 2.4 mm instead of 0.6-1.0 mm. Also, the flow through the labyrinth is turbulent instead of laminar. An additional advantage of this is a much more precise release than with a capillary. As a result, the jet length can be longer or the main hose thinner. It is also possible to feed on one side sooner.

The CapiNet is available with a right angle pin (Cap-S). The assembly possibilities with regard to punching distance and hose diameter are identical to those of the capillary.

Characteristics

• Moulded-in Netafim labyrinth with low CV-value.
• Less susceptible to clogging and more precise delivery than the capillary.
• Inner diameter of 2.4 mm.
• Available with angled connector (Cap-S).
  

Application
The CapiNet is intended as an improvement to the capillary. The application of the CapiNet is mainly as a replacement of capillary systems in vegetable, flower and pot plant cultivation.

Technical data

Installation & Maintenance

• Read 'General usage advice for drip systems' for tips on storage, construction and use.
• Installation options (punch spacing and hose diameter) are the same as for the capillary.
• The CapiNet drippers can be cleaned with acid, peroxide and or chlorine agents and/or suction (see 'Cleaning and attention points for dripper systems')