The Cobra dripper is a labyrinth dripper, with filter and plug in one and is therefore a very economical solution and alternative to capillaries. The Cobra is standard delivered as a hooked dropper, namely the Cobra-S, Cobra-mini and the Cobra-LF (Low Flow). There is also a straight Cobra, intended for multi-outlet systems. The difference compared to the Capinet dripper is that the Cobra has a built-in filter and is less susceptible to clogging, even in the long term or with dirty water.

Characteristics

• Accurate watering with constant pressure.
• By varying the pressure on the Cobra (from 0.5 - 1.2 bar), the watering can be adjusted to the water requirements.
• Application as a separate drip point or to be mounted in multi-outlet (water spider).
• Equipped with large inlet filter and labyrinth, which together provide excellent protection against clogging.
  

Application

The application of the Cobra is mainly known in flower cultivation, where due to a high plant density, many tricklers per surface are needed. The Cobra-S, The Cobra-mini and the Cobra-LF can be used both as an individual drip point or in a multi-outlet (water spider). The straight Cobra is for multi-outlet systems only.

Technical Data

Installation & Maintenance

• Read 'General use advice for drip irrigation' for tips on storage, installation and use.
• Cobra drip irrigation systems can be cleaned with acid, peroxide, chlorine and/or suction (see 'Cleaning and attention points for drip irrigation systems').