Application
COOLSOFT 104 is a multipurpose corrosion inhibitor and scale control product for use in recirculating cooling water systems. Anti-nucleating agents react with polymeric and sequestering ingredients to minimize eliminate and prevent deposit forming materials that retards heat transfer and interfere with effective corrosion control. COOLSOFT 104 is formulated for water operating without the need for pH control (free pH). The specific formulations permits to work with water in circuit at the highest L.I. (> + 3,0) thanks to new effective dispersant action.

• Very effective in scale control
• Improves heat transfer by maintaining clean metal surface
• Minimal disposal problems

Physical properties

Appearance	light yellow liquid
pH (undiluted)	8,0
Density (20 ºC)	1,07 kg/l
Freezing point	- 3 ºC

Dosing
The standard dosage is 100 ppm in recirculating water. Our technical service will advise the correct dosage based upon operating conditions. COOLSOFT 104 may be introduced at full strength or diluted and should be added at any point of the circulation to the basin or at the make – up water inlet.

Precautions
COOLSOFT 104 should be handled with care. Concentrated product may irritate eyes, skin and mucous membranes. Skin and other contacts must be avoided using rubber gloves and goggles. Refer to Health and Safety Data Sheet for additional information.